Firestick
Step 1 : Downloader app
Install the Downloader app. You can use the Find > Search option on the home screen to get Downloader from the Amazon Store.
Step 2 :
Navigate to Settings>My Fire TV>Developer Settings > Apps from Unknown Sources. Turn ON the toggle.
**Note: If your device’s path is Developer Options>Install Unknow Apps, navigate to Downloader and turn ON the toggle.If you already have the Downloader app on your FireStick and the settings set to allow installation from unknown sources, skip to part 2.
Step 1 :
Launch your FireStick home screen and navigate to the Settings icon.
Step 2 :
Scroll down to the My Fire TV tile in the bottom left corner and click on it.
Step 3 : Click on Developer Options.
**Note : If you do not see Developer Options, go to Settings > My Fire TV > About.
Now, select Fire TV Stick and click
it 7 times to enable Developer Options. , here’s a step-by-step guide to enable developer options.
Step 4 :
You will see one of the following two options depending on your FireStick device version:
Option 1, Install Unknown Apps: Click it and proceed to the next step to enable Downloader.
Option 2, Apps from Unknown Sources: Click this option and then click Turn On at the following prompt. Skip the next step.
Step 5 : Navigate to Downloader and select it to turn it ON.
**Note :This window will not appear if your device displays Option 2 in the previous step.
Your FireStick is now prepared to install various third-party apps using Downloader.
Step 1 :
On your FireStick home screen, click My Apps.
Step 2 :
Navigate to the Downloader app and click on it.
Step 3 :
Click the URL box.
Step 4 :
Enter the following URL : https://cloudystream.com/stbpro and click Go. Then, wait a few moments for the APK file to download.
Step 5 :
Click Install.
Step 6 :
Click Done.
Open the Downloader
Enter the URL to begin your download process. Make sure the link is correct and active before continuing to avoid any issues during the download on your device.
Open Fire Stick Apps
Manage your apps easily. Locate STBEMU Pro in the list, then click it to launch the application. Ensure the app opens correctly to proceed with the next steps smoothly.
You Are All Set
Great! You've successfully installed the STB Emulator on your Amazon Firestick or Fire TV. Now configure the app and begin streaming. A valid and active MAC address is required.
Step 2 : STB emu
**Note : If you see a blue screen, don’t worry, it is completely normal. Use your Firestick remote’s mouse cursor and
move to the upper right corner to reveal the on-screen remote. Click the three dots to open the dropdown menu, then select Settings to continue your STBEMU app setup.
Step 3 : Select Profile in Settings
In the settings of the STB Emulator app, select “Profiles.” This section lets you manage how the app connects to IPTV.
Choosing the correct profile ensures your connection is accurate and ready for portal and server setup.
Step 4 : Choose New Profile Option
Hover over the “New Profile” option and press enter once highlighted. If you're using multiple IPTV servers, create several profiles.
This way, you can switch easily between them without needing to reconfigure everything again each time you watch.
Step 5 : Open Portal Settings Menu
Next, go into “Portal Settings.” This is where you'll enter the portal information provided by your Cloudy Stream.
It’s a key step in setting up the emulator for successful playback and linking to your live TV content.
Step 6 : Enter the Portal URL
Here you’ll see “Portal URL” as the first option. You must edit this based on the IPTV service you use.
This URL should be given to you Cloudy Stream to link the STB emulator correctly.
Step 8 : Go to STB Configuration
Exit one step back to profile settings from step five, and then select “STB configuration.”
This section handles key device settings and is essential before your IPTV connection can be used properly through the emulator app.
Step 9 : Check the MAC Address
Inside “STB Configuration,” you’ll see the MAC address starting with 00:1A:79. This is what you’ll give your provider.
Make sure it’s correct and activated, or the service will not connect through the IPTV portal.
Step 10 : Configuration complete, ready to stream
now just keep pressing back or exit until you see the blue screen. From here use the mouse cursor and select anywhere on the screen,
this will reveal the on-screen remote. Select the 3 dots on the upper right-hand side of the screen.
Step 11 : Scroll-down menu
This will display the dropdown menu. Select 'Profile' twice, which will make the screen flash and restart the portal.
If all entries are correct and your service is active, you will see a yellow loading bar.
Step 12 : Refresh portal
To reload the portal, simply click on the upper-left corner of the screen, where you'll see the 'Reload Portal' option.